Motor Attachment Coupling

This is used to attach to the motor shaft on Turners.

The motor shaft must be 7mm or smaller. If you don't have a Digital Caliper to measure the diameter of your motor shaft,  a Mc Donald's Straw is exactly 7mm inside so if you slide the straw over the motor shaft and it is a snug fit then your motor has a 7mm shaft. 

• Attaching these to motors is easy. Loosen the 2 black set screws with the provided allen wrench, slide it over the shaft of the motor and tighten the 2 set screws back up.
• Please choose the correct PVC size and fitting when checking out.